Hydraulic Properties of Carbonate Rocks from Slovakian Borehole Database

Authors

  • Peter Malík State Geological Institute of Dionýz Štúr, Mlynská dolina 1, 817 04 Bratislava
  • Jaromír Švasta State Geological Institute of Dionýz Štúr, Mlynská dolina 1, 817 04 Bratislava

DOI:

https://doi.org/10.3986/ac.v39i2.94

Abstract

Using archival hard copy records on 22,922 wells and hy­drogeological boreholes, maintained since 1950's on the ter­ritory of Slovak Republic, a spatial database was developed. If possible, each borehole was linked to a certain aquifer or aquifer lithological type, according to its screened inter­val. Wells with ambiguous position of open casing were ex­cluded from further processing to obtain distinct relation of pumping rate to lithology. Using stored records of hydraulic tests, eachpumping rate was processed to obtain uniformly calculated “standard” specific capacity. These values were subsequently used to re-interpret hydraulic parameters. Based on standardized specific capacity data, estimates of transmissivity (T; in m2∙s-1) and hydraulic conductivity (K; in m∙s-1) for eachwell were calculated and linked to corre­sponding aquifer type. From these, hydraulic properties of limestones (238 boreholes), dolomites (463 boreholes) and granitoid rocks (96 boreholes) are compared. As anticipat­ed, geometrical mean of transmissivity was low for grani­toids (6.51∙10-5 m2∙s-1) and in one order of magnitude higher for limestones (6.16∙10-4 m2∙s-1), due to its enhancement by karstification. The highest observed value of mean transmis­sivity, two times higher than that found for limestones, was obtained for dolomitic aquifers (1.04∙10-3 m2∙s-1). Dolomitic aquifers also show the highest median values of hydraulic conductivity (3.21∙10-5 m∙s-1), in one order of magnitude higher than granitoids (2.10∙10-6 m∙s-1) and three times higher than limestones (9.45∙10-6 m∙s-1). In comparison with limestones, dolomites seem to be slightly more homogene­ous in aquifer properties; also several lithological types there show similarities in both T and K. Some limestone lithofacies (Steinalm and Raming), seem to have lower transmissivity and hydraulic conductivity comparing to other limestones types (Dachstein, Gutenstein, Wetterstein). The data on hy­draulic properties of all these hard rocks show lognormal statistical distribution and high heterogeneity.

Downloads

Download data is not yet available.

Downloads

Published

2010-06-01

How to Cite

Malík, P., & Švasta, J. (2010). Hydraulic Properties of Carbonate Rocks from Slovakian Borehole Database. Acta Carsologica, 39(2). https://doi.org/10.3986/ac.v39i2.94

Issue

Section

Original papers